Congratulations on purchasing an EDISΙON nano T265+
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
Unpacking
Connecting and switching on
Package Contents
Documentation
Service note
1
2
Note: For trouble-free signal reception your antenna
and cable installation should be calibrated and
inspected by a qualified professional with a digital
TV-level-measuring instrument.
• Connect the receiver using HDMI extension cable
via the HDMI port to your TV’s HDMI input port
• Then connect the coaxial cable via SMA to IEC
adaptor with the terrestrial or cable signal to the ANT
IN input of the receiver.
• Connect the Jack to IR cable to the IR IN port to
control the STB with the Remote Control unit.
• Insert the batteries into the remote control. Notes on
the remote control can be found on the back of these
instructions.
• For STB powering (DC 5V) via TV USB port, connect
the USB cable type-Y to the USB port of the STB
and to the USB port on the TV.
• The receiver starts with the BOOT process and is
operational with in a short time.
Please contact
your EDISION
specialist dealer
for any further
support
and service.
12mm
nano T265
+
Digital Terrestrial & Cable HDMI dongle Receiver DVB-T2/C H.265/HEVC
80 mm
27 mm
The CE certificate of the product is available on our webpage, by visiting this link:
https://www.edision.gr/en/support
Support
USB
For information about
EDISION Hardware or Software
matters, please contact [email protected] or visit the
DOWNLOAD CENTER: https://www.edision.gr/en/support
“The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.”
1
2
3
4
Receiver nano T265+
Note: The scope of delivery may also include parts not listed here.
2
3
4
5
6
7
8
9
1
HDMI in
2
USB 2
USB 1
After the first start,
choose your language
ANT IN: coaxial-wire input from
terrestrial / cable signal
coaxial-wire Antenna
1
Package Contents
1
Receiver
2
IR Remote Control 2in1
3
USB cable type-Y
4
HDMI extension cable
5
IR cable
6
SMA to IEC adaptor
7
1 x Cable tie
8
2 x «ΑΑΑ» batteries
9
Mini Manual GR/EN/DE/ES/IT/FR
Connections
1 HDMI: Connection to an HDTV quality TV
2
/
USB: Connection for USB storage devices & Powering (DC 5V)
via TV USB port
3 Infrared sensor for the reception of remote control commands
4
ANT IN: Input for connecting to terrestrial or cable signal from the
antenna via SMA to IEC adaptor
