background image

Congratulations on your choice of EDISION argus piccollo 3in1 plus CI receiver.

Please note that all the information included in this leaflet are valid at the date of printing the document.

Currently updated information and comprehensive manual are available at: www.edision.gr

Open package

Connection

IR remote control with 2x AAA batteries

Information

Service 

information 

piccollo 3in1 plus CI

1

2

piccollo 3in1

1

HDMI in

2

HD

m

i

kabel

HDMI

kabel

Antenna cable

Cable satellite antenna

Argus piccollo 3in1 plus CI receiver

Note: 

The front cover may be covered by a transparent plastic film from the factory, that can be easily peeled off.

The package may include accessories that are not mentioned in the respective section.

Front panel

 POWER button: Activates/Deactivates the device.

 Exit the window with the menu / dialog.

 MENU: Εμφάνιση ή απόκρυψη κεντρικού μενού.

 OK button: displays the Program list and/or cursor movement in the menus.

 Up/Down buttons: for moving in the program lists and/or cursor movement in the menus.

 Left/Right buttons: for volume adjustment and/or cursor movement in the menus.

 

 / USB port: for connecting external USB storage devices.

 The green LED lights up when the receiver is turned on. The red LED lights up when the receiver is in Standby mode.

 Display: Display including the time and location of the program.

10  Infrared sensor for the reception of remote control commands.

11  Embedded card reader.

12  Port for Conditional Access Module (CAM).

Rear side

13  ANT IN: Input for connecting to terrestrial or cable signal from the antenna.

14  LNB IN: For connecting the coaxial cable from the LNB, using the proper plug.

15  S/PDIF: Audio interface for amplifier/audio console.

16  

 / USB: Port for connecting USB memory devices

17  CVBS: Video output.

18  0/12V 50mA: Circuit voltage for connecting external devices..

19  L / R: Output amplifiers Audio.

20  HDMI:For connection to a TV set, using HDMI cable. For HD TV signals.

21  RS 232: For connecting to a PC, using RS-232 cable, for receiver software update.

22  ETHERNET (RJ45): For connection with LAN/INTERNET, for home use.

23  POWER: ON/OFF of the receiver power supply.

Note: For trouble-free TV signal reception, 

the installation and calibration should be carried 

out by a qualified professional.
 Connect the receiver using HDMI cable

  via the HDMI output port to your TV’s HDMI input port  
 Now connect the receiver to the satellite

  antenna cable via the LNB IN input 
 Insert the batteries into the remote control.

  Notes on the remote control can be found on

  the back of these instructions
 Some functions of the receiver increases comfort during use - but only work in combination with the Internet connection. If you wish to use these functions, 

  connect the device via the Ethernet interface with LAN cable - (RJ45) at the entrance of your internet.
 Connect the receiver to the mains socket.
 Activate the receiver by pressing the ON/OFF switch in the back, to the «ON» position. 

  The receiver goes into «BOOT» mode and after a few moments it is ready for use.

1

3 4

5

6

7

2

9

8

For complete 

after sales 

service, please 

contact

your EDISION

specialist dealer.

power outlet

HDMI:

Line OUT
HDMI cable

TV connection panel

Use an HDMI input!

23

21

22

20

16

14

15

19

17

18

13

11

12

10

ANT IN: coaxial-wire input 

from terrestrial / cable signal

LNB IN:Connection for the 

coaxial cable from the LNB

Отзывы: