Edirol V-440HD, Руководство пользователя, Страница: 69 / 92

69
MIDI implementation
Model: V-440HD Version: 2.00 Date: Aug. 22. 2006
Symbol Item Setting range
n: MIDI channel 0H-FH (ch.1 - ch.16)
vv: Control value, 00H-7FH (0 - 127)
Velocity value, etc. (Only when the item is the Note On Velocity, the
setting range is “01H-7FH (1 - 127)”.)
kk: Note number 00H-7FH (0 - 127)
xx: Switch on and off 00H-3FH (0 - 63): OFF
40H-7FH (64 - 127): ON
1. MIDI messages received at MIDI IN
* If MIDI Thru is ON, MIDI messages received at MIDI IN will be retransmitted without
change from MIDI OUT.
■
Channel Voice Massage
●
Note Off
Status Second Third
8nH kkH vvH
9nH kkH 00H
* Only received in the Note Mode.
* Velocity is ignored.
●
Note On
Status Second Third
9nH kkH vvH
* Received only when “Note Mode” under 14. MIDI Setup (p. 65) in the menu is set to On.
* Selects the channel to which the note number is assigned.
* Input switches with Note On.
* With “PP Mode” under 14. MIDI Setup (p. 65) in the menu set to On, you can use the
velocity to set the channel transition time.
* The correspondence between note numbers and channels in 49-Key MIDI Keyboard
Mode is shown below.
+---------+--------------+
| Note No.| Assign Ch |
+---------+--------------+
| 24H | A-Bus 1ch |
+---------+--------------+
| 26H | A-Bus 2ch |
+---------+--------------+
| 28H | A-Bus 3ch |
+---------+--------------+
| 29H | A-Bus 4ch |
+---------+--------------+
| 2BH | B-Bus 1ch |
+---------+--------------+
| 2DH | B-Bus 2ch |
+---------+--------------+
| 2FH | B-Bus 3ch |
+---------+--------------+
| 30H | B-Bus 4ch |
+---------+--------------+
| 32H | C-Bus A/Bch |
+---------+--------------+
| 34H | C-Bus 1ch |
+---------+--------------+
| 35H | C-Bus 2ch |
+---------+--------------+
| 37H | C-Bus 3ch |
+---------+--------------+
| 39H | C-Bus 4ch |
+---------+--------------+
| 3BH | D-Bus A/Bch |
+---------+--------------+
| 3CH | D-Bus 1ch |
+---------+--------------+
| 3EH | D-Bus 2ch |
+---------+--------------+
| 40H | D-Bus 3ch |
+---------+--------------+
| 41H | D-Bus 4ch |
+---------+--------------+
●
Control Change
* By making settings in MIDI Setup, you can use these messages to control a wide variety
of things. The control changes that can be used are CC#1–5, 7–31, and 64–95. For details
on the factory settings, refer to “Settings Transmitted/Received Using MIDI” (p. 75).
❍
Bank Select (controller numbers 0, 32)
Status 2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
mm, ll= bank number: 00 00H - 7F 7FH (bank, 1 - bank, 16384)
* Processing of a Bank Select message is suspended until a subsequent Program Change is
received.
* Bank Select data that is received will be maintained until a subsequent Bank Select is
received.
* This selects the input for each channel.
* Bank Select LSB will be ignored.
Controls correspond to bank select messages as follows.
--------------------------------------------------------------------------------------------------
Bank Select
Program No. Control
MSB/LSB
--------------------------------------------------------------------------------------------------
00H/00H
00H - 03H A ch, INPUT 1-4
--------------------------------------------------------------------------------------------------
01H/00H
00H - 03H B ch, INPUT 1-4
--------------------------------------------------------------------------------------------------
02H/00H
00H - 04H C ch, INPUT AB-4
--------------------------------------------------------------------------------------------------
03H/00H
00H - 04H D ch, INPUT AB-4
--------------------------------------------------------------------------------------------------
❍
Modulation (controller number 1)
Status 2nd byte 3rd byte
BnH 01H vvH
❍
Breath-type (controller number 2)
Status 2nd byte 3rd byte
BnH 02H vvH
❍
Foot-type (controller number 4)
Status 2nd byte 3rd byte
BnH 04H vvH
❍
Portamento Time (controller number 5)
Status 2nd byte 3rd byte
BnH 05H vvH
❍
Volume (controller number 7)
Status 2nd byte 3rd byte
BnH 07H vvH
❍
Balance (controller number 8)
Status 2nd byte 3rd byte
BnH 08H vvH
❍
Panpot (controller number 10)
Status 2nd byte 3rd byte
BnH 0AH vvH
❍
Expression (controller number 11)
Status 2nd byte 3rd byte
BnH 0BH vvH
❍
Effect Control 1 (controller number 12)
Status 2nd byte 3rd byte
BnH 0CH vvH
❍
Effect Control 2 (controller number 13)
Status 2nd byte 3rd byte
BnH 0DH vvH
❍
General Purpose Controllers 1–4 (controller numbers 16–19)
Status 2nd byte 3rd byte
BnH 10H - 13H vvH