manualshive.com logo in svg

Edirol V-4, Руководство пользователя

Поделиться
Скачать
Edirol V-4 Скачать руководство пользователя страница 14

 

14

Before you begin

 

3.

 

Power cable hook

Use this hook to retain the power cable so that it will not be accidentally unplugged.

 

4.

 

MIDI OUT connector (MIDI OUT) 

MIDI messages input from an external device are output without change (“thru-ed”) from this 
connector. When using V-LINK to control both the V-4 and a DV-7PR, connect this output to the 
input of the DV-7PR.

 

5.

 

MIDI IN connector (MIDI IN)

Use this connector to input control signals sent from an external device to the V-4.

 

6.

 

S-video output jack (S-VIDEO OUTPUT)

This jack outputs a S-video signal.

 

7.

 

S-video input jacks (S-VIDEO INPUT)

These jacks input S-video signals.

 

Front Panel

 

8.

 

Video (composite) input jacks (INPUT)

These jacks input video (composite) signals. If both video (composite) and S-video signals are input 
simultaneously to the same channel (channel 1 or 2 only), the S-video signal will take priority, and 
the video (composite) signal will be ignored.

 

9.

 

Preview select buttons (PREVIEW OUT SELECT) (see p. 20)

These buttons select the image that will be output to the preview monitor. You can select one of the 
input signals of channels 1 through 4, or the mixed output signal.

 

10.

 

Preview output jack (PREVIEW OUT)

This jack outputs the preview monitor signal. Simultaneously, MIDI and effect parameters are also 
output to the preview monitor.

 

11.

 

Video (composite) output jacks (OUTPUT)

These jacks output video (composite) signals. In conjunction with the S-video output jack, these 
jacks let you simultaneously output to three TV monitors or projectors.

 

12.

 

Parameter setting buttons

These buttons are used to set various parameters for each button. The parameters are displayed on 
the TV monitor connected to the preview output jack.

 

13.

 

BPM indicator (see p. 39)

This displays the current BPM (Beats Per Minute) setting. You can turn the dial below to change 
the displayed setting.

 

14.

 

Tap button (TAP) (see p. 39)

This button is used to control BPM. The speed at which this button is tapped affects the BPM 
setting.

 

15.

 

Output fade dial (OUTPUT FADE) (see p. 25)

This dial is used to apply fade-to-white or fade-to-black to the final output. Turn the dial toward 

V-4_e.book 14 ページ ２００７年１０月１７日　水曜日　午後７時１５分

Содержание V-4

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды