55
Using the Audio Mixer
2.
Press
[PAGE
]
and
[PAGE
]
simultaneously. The parameters will be listed in the display.
3.
Turn the
[V1]
knob so that the parameter you want to edit is highlighted.
4.
Turn the
[V3]
knob to edit the value.
fig.3-11
5.
Once again, press the
SOURCE
button you pressed in
step 1
to return to the icon display.
■
Audio mixer parameter list
This section describes the Audio Mixer parameters
that can be adjusted in each screen (when using the
Icon display).
*
Valid only for preset routing 05.
*
Valid only for preset routing 05.
Page 5(fig.3-16)
Knob
Display (Name)
Range
Explanation
Example screen
V1
TYPE
00–18
Routing preset
V2
RECOUT
(record volume)
0–127
Recording level
sent to computer
V3
MASTER
(master volume)
0–127
Output level from
OUTPUT 1 jacks
Knob
Display (Name)
Range
Explanation
Example screen
V1
A Vol
(analog volume)
0–
100
–127
Volume of the an-
alog input jacks
V2
A Muted
(analog mute)
OFF
, ON
Mute on/off for
the analog input
jacks
V3*
A Send (analog
send level)
0–
64
–127
Send level from
the analog input
jack to effects
Knob
Display (Name)
Range
Explanation
Example screen
V1
D Vol
(digital volume)
0–
100
–127
Volume of the
digital input jacks
V2
D Mute
(digital mute)
OFF
, ON
Mute on/off for
the digital input
jacks
V3*
D Send (digital
send level)
0–
64
–127
Send level from
the digital input
jack to effects
Knob
Display (Name)
Range
Explanation
Example screen
V1
W Vol
(wave volume)
0–
100
–127
Volume of USB
audio
V2
W Mute
(wave mute)
OFF
, ON
Mute on/off for
USB audio
V3*
W Send (wave
send level)
0–
64
–127
Send level from
the USB audio to
effects
sd90_manual_e.book 55 ページ 2004年10月4日 月曜日 午後3時28分