25
Using the internal sound generator
Selecting a drum set
If the part type is Drum Set, use the following procedure to select a drum set. First make sure that the part
type is Drum. For details on how to set the part type to Drum, refer to
"Selecting the type of part (INST/
For details on the drum sets that are available, refer to
"Instrument list (GM2 / Native mode)"
*
Drum sets do not have variation sounds.
fig.5-07
1.
Press
[INST/DRUM SET]
.
fig.5-07a_67.2
2.
Turn the
[V1]
knob to select a drum set. The
INST
(number) in the display will change, and the drum set
name shown in the center of the display will also
change.
3.
Press
[INST/DRUM SET]
once again to return to the basic screen.
2
1, 3
sd90_manual_e.book 25 ページ 2004年10月4日 月曜日 午後3時28分