52
Creating a movie
Create the background of the movie.
Here you select the motion pattern of the image (effect) and the image to be used
(photo material) to create the background.
You can set your images to move in several ways by selecting an effect pattern.
When the background clip is made, you can place it anywhere on the time track in
the timeline. You can also set the length of each background clip, or adjust the effects
more precisely.
The number of photos depends on the kind of effect.
As photo material, you can use file data created on your PC, or photos taken with a
digital camera.
The data formats that can be used are as follows:
• Format: JPEG (.jpg)
• Size: 1600 X 1200 pixels or smaller
(If the file data size is larger than 1024 X 768 pixels, it will be automatically resized
down to 1024 X 768 pixels.)
Import photo materials to be used for background clips to the photo list.
Each palette can hold up to 12 photos.
You can import photos saved to the internal hard disk, or to a CompactFlash card.
1
Click the “BACK/PHOTO” tab to access the material list (photo list) to be used
to create the background clip.
fig.editor11.eps
Creating background clips
Photos that can be used for background clips
Importing photo material to be used for
background clips
For detailed instructions
regarding how to save material
to the internal hard disk or to a
CompactFlash card, refer to
"BACK/PHOTO" tab
Photo list
000RG-100.book 52 ページ 2004年8月6日 金曜日 午後5時37分
Содержание RG-100
Страница 126: ...000RG 100 book 126 ページ 2004年8月6日 金曜日 午後5時37分 ...