Edirol PCR-A30, Руководство пользователя

Страница: 9 / 112

9
Names of things and what they do
13 Display
Indicates the current status and various other information.
14 Controllers [S1]–[S8]
You can assign MIDI messages to these controllers.
15 Controllers [L1]–[L3]
You can assign MIDI messages to these
controllers.
* You can also assign MIDI messages to these
controllers as desired.( Edit mode ( EDIT ) (p. 53)
16 TRANSPOSE/ENTER Button
Use
[TRANSPOSE]
+
[OCTAVE -/+]
to
transpose the pitch of the keyboard in
semitone steps. Also, in any mode except
PLAY mode, it functions as the
[ENTER]
button, which you need to press to confirm
the settings you’ve made.
17 OCTAVE -/+
Press
[OCTAVE -/+]
to shift the pitch of the
keyboard up or down in steps of an octave.
When not in PLAY mode, use these buttons
to return to the previous setting item (the
[BACK]
button) or to cancel the setting and
return to PLAY mode (the [CANCEL]
button).
18 BENDER Lever
This lever can be used to modify the pitch or
apply vibrato.
You can change the SPEAKER ON/OFF setting by holding down
[]
or
[TRANSPOSE]
while you turn on the power.(
➝
SPEAKER ON/OFF (p. 85))
fig.SP
USB Lights if the PCR-A30 is connected to your computer via USB.
DATA OUT This will blink when MIDI messages are transmitted via USB or MIDI OUT.
HEX Lights when the value shown in the display is hexadecimal.
Turn on the power while holding down [] SPEAKER OFF
Turn on the power while holding down [TRANSPOSE] SPEAKER ON
fig.panelB_50
13
14
fig.panelC_50
15
16
17
18
PCR-A30_e2.book 9 ページ ２００３年１０月２２日 水曜日 午後３時１９分