manualshive.com logo in svg

Edirol M-100FX, Руководство пользователя, Страница: 166 / 184

Поделиться
Скачать
Edirol M-100FX Скачать руководство пользователя страница 166

166

Using Advance mode

Driver settings

Windows XP/2000/Me

Set the 

Default Device

 for 

Sound Recording and Playback

 (in Windows 2000/Me, 

[Default Device]

) as follows.

→

For details on how to make this setting, refer to 

Specifying the audio input/output destination

 (p. 131).

Windows 98

Set the 

[Default Device]

 for 

playback and recording

 as follows.

→

For details on how to make this setting, refer to 

Specifying the audio input/output destination

 (p. 131).

■

About the input/output devices

ASIO Direct Monitor

Sine the M-100FX’s INPUT is always monitored, the M-100FX does not support ASIO Direct Monitor. Support is simulated in 
order to improve usability.

Sound recording

EDIROL M-100FX Out

Sound playback

EDIROL M-100FX In

Playback

EDIROL M-100FX Out

Recording

EDIROL M-100FX In

Output devices
EDIROL M-100FX Out

This sends audio data from the computer to the M-100FX. This is the setting you will normally use, such as when 
using the M-100FX with Media Player. You will also select this setting when using an application such as SONAR 
in WDM driver mode, or when using a Direct Sound application.

MME Out EDIROL M-100FX

This sends audio data from the computer to the M-100FX. Use this setting if you are using the M-100FX with an 
application that does not have a WDM driver mode, or if you want to use 24-bit audio with an application does 
not support ASIO (such as Cool Edit).

* Windows XP/2000 only

Input devices
EDIROL M-100FX In

This receives audio data sent by the M-100FX to the computer. This is the setting you will normally use, such as 
when using the M-100FX with Media Player. You will also select this setting when using an application such as 
SONAR in WDM driver mode.

MME In EDIROL M-100FX

This receives audio data sent by the M-100FX to the computer. Use this setting if you want to use 24-bit audio 
with an application that does not have a WDM driver mode or does not support ASIO (such as Cool Edit).

* Windows XP/2000 only

ASIO device

If you are using the M-100FX with an ASIO-compatible application such as Cubase, select “EDIROL M-100FX” 
as the ASIO setting on your application.

* To prevent an audio oscillation loop or double monitoring, turn monitoring Off in your application, or use ASIO Direct 

Monitor.

Содержание M-100FX

























































































































































































Отзывы:

Нет отзывов