Edirol Direct Linear DV-7DL Pro Скачать руководство пользователя страница 78

Страница: 78 / 372

Editing Video

Editing Palette Selection Tabs

These change the editing mode (

p. 69

p. 79

Time Scale

This scale indicates the time of the sequence and

the playback position. The position bar moves to
the clicked region.

Marker Setting Buttons

These buttons make settings for timeline markers

(p. 283).

Set In Point/Set Out Point Buttons

These buttons set an In point and Out point for the

entire timeline (p. 282).

Move Cut Point Buttons

These select the video material either before or

after the currently selected video material (p. 80).

Audio Level Point Buttons

These buttons set the volume level for audio

material (p. 129).

Track Edit Buttons

These buttons are for editing material arranged on

the tracks.

Copy Button

These copy and paste the selected material (

p. 73

Undo/Redo Button

This lets you undo an incorrect operation. It also

lets you redo an operation you have done back to
its previous state (p. 67).

A/B ROLL Button

Provides for use of the A/B Roll feature.

Audio Level Meter

This displays the volume level at the playback

location.

It works only during playback of a sequence.

Scrub Button

Cut off the scrubbing sound at the Position Bar.

Performing Editing on the Timeline Palette

Names and Features of Components on the Timeline Palette

DV-7DL_PRO_e2.book 78 ページ２００５年１月７日　金曜日　午後１２時２分

Содержание Direct Linear DV-7DL Pro





















































































































































































































































































































































































Результаты поиска

Содержание Direct Linear DV-7DL Pro

Отзывы:

Бренды по названию

Популярные бренды

Edirol Direct Linear DV-7DL Pro, Руководство пользователя

Результаты поиска

Содержание Direct Linear DV-7DL Pro

Отзывы:

Бренды по названию

Популярные бренды