7
Special settings for TV connection
• Digital In
(12-13.)
Connect with optical or coax cable to TV models with digital output.
• RCA/phono
(7.)
Connect the TV's audio output (AUDIO OUT or AUX OUT) to In 3 RCA/Phono (7.)
• SCART
(9-10.)
Check that the TV´s SCART system works, i.e. the TV switches the mode automatically
when a connected externall unit (DVD etc.) is turned on. Disconnect the SCART cable
from the TV and connect it to the output Ext (10.) on the CLS-5 unit. Connect an
additional SCART cable between the SCART output on the TV and the SCART input (9.)
on the CLS-5.
• Sound adjustment/TV Sync
(5.)
For adjustment of time delay between the audio and video signal use the TV sync
adjustment potentiometer.
Connecting an alert signal
The alert signal system can be triggered in three ways:
1. External Doorbell drive: +24 VDC Doorbell. Terminal 3-6 on the terminal block
2. External trigger: 5-24 V AC/DC. Terminal 4-5 on the terminal block
3. External switch: Terminal 3-4 and 5-7 are shorted separately. The external switch is
connected between 3-4 and 5-7.
The acoustic indication suppresses the sound in the loop and initiates a broadband
harmonic sound that covers most of the non-linear frequency hearing impairments.
