10
Safety and Warranty
The equipment should be installed by an audio visual technician observing 'good electrical
and audio practice' at all times and following the instructions within this document.
Connect the power to the amplifier before connecting to the network, otherwise
there is a risk of sparking.
The installer is responsible for installing the product in a way that may not cause risk
of fire, electrical malfunctions or danger for the user. Do not cover the loop driver. Only
operate the unit in a well ventilated, dry environment.
There are no user serviceable parts inside the unit. Refer servicing to qualified personnel.
Please observe that the product warranty does not include faults caused by tampering with
the product, carelessness, incorrect connection/ mounting or maintenance.
Bo Edin AB shall not be held responsible or liable for interference to radio or TV equipment,
and/or to any direct, incidental or consequential damages or losses to any person or
entity, if the equipment has been installed by unqualified personnel and/or if installation
instructions stated in the product Installation Guide have not been strictly followed.
Troubleshooting
Check the LED indicators and run the troubleshooting procedure according to sections
Technical Description, System check/Troubleshooting described in this installation guide.
Use Univox® Listener to check the sound quality of the loop.
Service
If the product / system is not working properly after completing the troubleshooting
procedure, please contact your local distributor od Bo Edin directly for further instructions.
The appropriate Service form, available at www.univox.eu, should be completed before
sending any products back to Bo Edin AB for technical consultation, repair or replacement.
