Password:
Enter the password provided by your ISP.
Disconnect Timeout:
Disconnect Timeout means the router will disconnect after
being idle for a preset amount of time.
WAN Type:
Select type from the list.
VC Settings
VPI:
If instructed to change this, type in the VPI value for the initial connection (using
PVC 0). Default =
8
.
VCI:
If instructed to change this, type in the VCI value for the initial connection (using
PVC 0). Default =
35
.
Static IP Address:
Enter the IP address provided by your ISP. such as
192.168.241.101.
Subnet Mask:
Set your Subnet Mask such as 255.255.255.0
BRIDGE
Mode:
Select
Enable
or
Disable
from the list.
Note: Click the Submit button to save the settings in temporary memory. If you make
changes
the configurations.
13
