1. Vacuum power switch. “l” is on. “O” is off.
2. Pump Power switch. “l” is on. “O” is off.
3. Heater power switch. “l” is on. “O” is off.
4. Circuit locator confirmation light: Lights up green when both power cords are on two separate circuits.
5. Pressure gauge: Displays pump pressure.
6. Pressure regulator: Allows presure to be adjusted by turning clockwise (raising pressure) or counter-clockwise
(reducing pressure).
7. Solution line Q.D.: Allows solution line to be connected to the machine.
8. Vacuum hose inlet barb: Allows vacuum hose to be connected to the machine.
9. Pumpout power switch. “l” is on. “O” is off.
10. Priming/ pressure relief valve. Pointed to “P” is open. Pointed down is closed.
7
VAC
PUMP
HEATER
PUMPOUT
P
CONTROL PANEL OVERVIEW
1
10
2
3
4
5
6
7
8
9