SET UP OF THE OPTIONAL 991RS ACCES-
SORY CHEMICAL INJECTOR SYSTEM
(NOT INCLUDED):
STEP 1.
Locate the short blue hose on the 991RS. Connect it to
the male quick connect on the switch panel of the EN-
DEAVOR. #7 on page 7.
STEP 2.
Connect the female quick connect on your 25FT work-
ing solution hose to the male quick connect on the main
body of the 991RS.
STEP 3.
The intake bottle caps, and the clear hoses that are at-
tached to them, are designed to be removed and inter-
changed by way of a quick release system. When you
first receive your new 991RS, you will need to install the
hoses by pushing them inside the quick release open-
ings. See 991RS manual for detailed instructions.
To remove the hose, push down on the release tab and
pull back on the hose.
Extra intake bottle Cap/ hose assemblies are available for
purchase.
13