manualshive.com logo in svg

EDI SmartMonitor MMU-16LE Series, Руководство по эксплуатации, Страница: 7 / 56

Поделиться
Скачать
EDI SmartMonitor MMU-16LE Series Скачать руководство пользователя страница 7

MMU-16LE 

SmartMonitor

 

Operations Manual 

Eberle Design Inc. 

Page 1 

Section 1  

General 

1.1 DESCRIPTION 

The MMU-16LE 

SmartMonitor

®

 

series Malfunction Management Unit (MMU) is a device 

used in a Traffic Controller Assembly to accomplish the detection of, and response to, 
improper and conflicting signals and improper operating voltages in a Controller Assembly 
caused by malfunctions of the Controller Unit (CU), load switches, or mis-wiring of the 
cabinet. The MMU-16LE 

SmartMonitor

®

 

also provides error sensing of two +24Vdc cabinet 

supplies and the controller power supplies via +24V MONITOR I, +24V MONITOR II, and 
Controller Voltage Monitor (CVM) inputs respectively. The Eberle Design MMU-16LE 

SmartMonitor

®

 

is directly interchangeable with a standard NEMA Malfunction Management 

Unit and meets with or exceeds all specifications outlined in Section 4 (Malfunction 
Management Unit) of the National Electrical Manufacturers Association (NEMA) 

Standards 

Publication TS2-2003 

v02.06, 

Traffic Controller Assemblies With NTCIP 

Requirements

. 

1.2 ADVANCED FEATURE OVERVIEW 

1.2.1 LIQUID CRYSTAL STATUS AND FIELD DISPLAY 

The MMU-16LE 

SmartMonitor

®

 

uses a programmable alpha-numeric Liquid Crystal Display 

(LCD) to show monitor status and two icon based LCDs to show field signal channel and 
fault status. This versatile back-lighted  display system provides  a service technician with 
both detailed information regarding cabinet voltages, configuration, and status, and at the 
same time an easily read field signal status display showing full intersection status.  

1.2.2 MENU DRIVEN OPERATION 

The Display, Program, and Help  modes  of the MMU-16LE 

SmartMonitor

®

 

are  controlled 

using a simple menu driven user interface. The menu provides an organized scheme for 
displaying both current status as well as reviewing historical fault status. It also provides a 
mechanism for setting and reviewing the monitor enhanced-feature programming without 
the need for a laptop computer. 

1.2.3 CONTEXT SENSITIVE HELP SYSTEM 

The built-in Help system provides operational guidance as well as trouble shooting advice 
to both the novice and expert technician. The front panel HELP button presents the 
requested information on the main LCD depending on the display  page  and context 
currently selected.  

From start to finish, a technician can use the Set-up Wizard to accurately and quickly 
configure the monitor, and then use the Diagnostic Wizard to analyze the cause of a 
malfunction without the need for understanding complex monitor terminology and theory. 

1.2.3.1 SET-UP WIZARD 

The  built-in  Set-up Wizard (see Section  6.3.14)  configures the monitor enhanced-feature 
programming using a simple series of intersection related questions. It allows a technician 
to accurately and completely program the MMU-16LE 

SmartMonitor

®

 

enhanced functions 

without the need for understanding the complexities of monitor enhanced  configuration 
parameters. 

1.2.3.2 DIAGNOSTIC WIZARD 

The built-in Diagnostic Wizard (see Section 3.10) is an integral part of the Help System that 
provides detailed diagnostic information regarding the fault being analyzed. The Wizard 
provides a concise view of the signal states involved in the fault, pinpoints faulty signal 

Содержание SmartMonitor MMU-16LE Series

























































Отзывы:

Нет отзывов