Edgetech USBL BROADBAND ACOUSTIC TRACKING SYSTEM Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 102

Edgetech USBL BROADBAND ACOUSTIC TRACKING SYSTEM Скачать руководство пользователя страница 10

x

BATS

0018257_REV_A

International Shipping Return Instructions

The following steps only apply to material being returned from outside the Continental United States, and
must be followed carefully to prevent delays and additional costs:

1.

The waybill and all shipment documentation associated with the shipment must clearly state that
the

Country of Origin/Manufacturer is USA

.

2.

The waybill and all associated shipment documents must state the following to eliminate
taxes levied:

United States goods returned to manufacturer for repair purposes only

.

3.

The waybill and all documents associated with the shipment must state the following for
description (HS Tariff Code eliminates duty charges):

Geophysical Scientific Instrumentation; Side

Scan System, Beacons; HS Tariff Code: 9015.80.80.80

4.

If using a freight forwarder, ensure they understand that the goods are duty & tax free United
States goods returned to manufacturer for repair only. Additionally, please instruct the freight
forwarder that the shipment is FREE DOMICILE and must be delivered to our door.

5.

Please send all shipping documents in advance of the shipment by email to

[email protected]

. Providing EdgeTech with the shipping documents will enable us to

follow up with the carrier on our end.

Also include EdgeTech’s broker information below on the commercial invoice:

Attn: Brenda Richards - [email protected] | Terri DiOrio - [email protected]

TransGroup BOS INTL, 140 Eastern Ave, Chelsea MA 02150
Office: 617-889-5089 TF: 877-839-3353

Fax: 617-889-5189

NOTE:

For International Shipments, If the value of the equipment is over

$1000, the following Shipper's oath must be sent with the invoice. This
oath can be typed on the invoice or on a separate letterhead:

"I, ______________________________, declare that the articles herein specified are the growth,

produce, or manufacture of the United States; that they were exported from the

United States from the port of _____________________, on or about _______________; that they

are returned without having been advanced in value or improved in condition by any

process of manufacture or any other means; and that no drawback, or allowance has

been paid or admitted hereof."

Signed ______________________________

«
...
8
9
10
11
12
...
»

Содержание USBL BROADBAND ACOUSTIC TRACKING SYSTEM







































































































Отзывы:

Нет отзывов