Edgetech Model 3100P Sub-bottom Sonar System, Руководство по оборудованию

Страница: 66 / 66

APPENDIX A: SYSTEM RESTORE A-10
A P P E N D I X A : S Y S T E M R E S T O R E
The following section outlines the procedures for backing up and restoring the system drive.
CAUTION!
All data will be lost upon restoring the system to factory settings. Be
sure to backup all data before preforming the procedure below.
1.
Ensure that topside is off.
2. Insert USB3 flash drive in blue USB3 port.
3. Start topside and be prepared to press F ⋆⋆ key when prompted:
a. If the topside is rack mount, press F11 .
b. If the topside is a laptop, press F12 .
4. Under Please select boot device: By using up/down arrow keys, select EUFI:
Corsair Voyager 3.0 000A, then press Enter .
5. Wait for Paragon Backup & Recovery 14 Home screen to appear, then click
Restore
icon.
6. On Welcome to the Restore Wizard screen click Next .
7. On Browse for Archive screen, drag down menu and click on ⊞ to the left of
(E:) . Click on folder named as a variation of V ⋆ . ⋆ . ⋆ _ ⋆⋆⋆⋆ R for rack mounts, or
V
⋆
.
⋆
.
⋆
_
⋆⋆⋆⋆
P for laptops. When Archive File Details window appears, click
Next .
8. At What to restore window, click Basic MBR Hard Disk 0 , click Next .
9.
At
Where to restore
window, ensure that
Basic MBR Hard Disk 0
is already
selected (brown box around it). If it is not, use up/down arrow keys to select.
Click
Next .
10. At Restore results window, make no selection and click Next .
11.
At the
Ready to restore from the archive
window, select ʘ
Yes, apply the
changes physically. Click Next . Restoring will begin.
12. At Completing the restore wizard , click Finish . Click Shutdown .
13. Remove USB3 flash drive and restart topside.