Edgetech Model 3100P Sub-bottom Sonar System, Руководство по оборудованию

Страница: 37 / 66

3-3
3.4 3100-P Portable Topside Placement
Ideally, the portable topside will always be located in a dry, sheltered area that is protected from weather
and water spray. However, the rugged design of the unit allows it to be exposed to light precipitation
when the case is sealed.
CAUTION!
Never operate or open the unit where it can become wet from sea spray
or precipitation.
The unit should also be placed in an area where the temperature is consistently between 0°C and 40°C
(32°F and 104°F). Avoid areas of direct sunlight, especially in tropical environments, as heat buildup could
occur and viewing the laptop display and status indicators could be difficult. The location should also
enable direct communications with the deck crew that is handling the tow vehicle.
3.5 Topside Controls and Indicators
The 3100-P Portable topside controls and indicators are called out in F
IGURE
3-1 , and are as follows:
POWER SWITCH: Turns on the system.
READY INDICATOR: Green LED that lights up solid and remains on when the system is ready
to run.
PING INDICATOR: Yellow LED lights up during startup to show that the system is initializing,
then shuts off. Once the system has begun pinging, the LED blinks
continuously.
POWER INDICATOR: Red LED that indicates the system has power going to it.