EdgeStar ESB1LP, Руководство пользователя

Страница: 15 / 34

8
Tip: Gather the model and serial number from the product label and write them down
before installing the gas side burner(s).
WARNING: Use two more people to move and install the gas side burner. Failure to do
so can result in back or other injury. Carefully remove the packaging materials. Remove
any shipping tape and glue from your gas side burner before using. Do not use sharp
instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or
glue. These products can damage the surface of your gas side burner.
IMPORTANT: Do not remove any safety, warning, or product information labels from
your gas side burner.
Unpacking the Gas Side Burner
Check the rating label on your side burner to ensure that the fuel source is appropriate for your
application
before trying to connect any gas lines.
Installing the Gas Side Burner
Notes About Installation

The gas side burner should be installed in accordance with all local code requirements
in addition to the National Fuel Gas Code, ANSI Z223.1 / NFPA 54.

Installation by a professional is highly recommended for proper placement and
functionality.
o
In the state of Massachusetts, installation and repairs MUST be performed by a
qualified or licensed contractor, plumber, or gas fitter qualified or licensed by the
State of Massachusetts.

This gas side burner is not intended to be installed in or on boats or recreational
vehicles (RVs).

Make sure that there are no kinks and no twisting in gas supply hoses.