EdgeStar Built-in Kegerator
6
Reversing the Door Swing
Follow the instructions below to reverse the door swing.
IMPORTANT: Before you begin, unplug the refrigerator.
To reverse the door from right swing to left swing:
1. Open the door and using a Phillips screwdriver, remove the
bottom screws from the lower hinge.
2. Carefully slide the bottom of the door forward and down, and
place it on a padded surface to prevent damaging it.
3. Remove the screws from the upper right hinge. Place the upper
right hinge in a safe place in case you need to reverse the door in
the future. Remove the plastic caps from the upper left hinge
corner. Install the upper left hinge by fastening the screws through
the left hinge to the cabinet. Insert the plastic caps to the upper
right corner.
4. Remove the bottom right support bracket. Remove the plastic
caps from the bottom left hinge corner. Insert the plastic caps to the
bottom right corner. Install the bottom left support bracket from the
plastic bag that was included with the instruction manual.
5. Carefully insert the door into the upper left corner hinge. Install
the lower hinge on the left corner of the door
6. Slide the door on top of the lower hinge and secure the door by
installing the lower screws.
