manualshive.com logo in svg

Edge PresencePlus P4, Руководство пользователя

Поделиться
Скачать
Edge PresencePlus P4 Скачать руководство пользователя страница 58

50

P/N 120413

01/05

Tools Screen

PresencePLUS

®

P4 EDGE

Banner Engineering Corp.

•  Minneapolis, MN USA

www.bannerengineering.com • Tel: 763.544.3164

The typical procedure for building or modifying an inspection is outlined below and explained in more detail later in this section.

1. Choose a tool.
2. Add a Region of Interest (ROI).
3. Set tool parameters.
4. Select 

Quick Teach

 or 

Next

 (to proceed to the Teach mode).

NOTE:

Quick Teach 

automatically sets judgment parameters by using the reference image as the target and applying the 

parameter tolerances selected in the Measure and Test tool(s). Once completed, Quick Teach prompts the user to 
save the inspection and proceeds automatically to the Run screen. Quick Teach provides the user with a very fast 
method of establishing candidate inspections.

Teach 

automatically sets judgment parameters by running inspections on known good products. As an option, 

judgment parameters can be entered in the Test tool

 Results

 tab, and the inspection can be run without teaching.

CAUTION:

 If Quick Teach or Teach is used, all “hand-entered” parameters will be overwritten. 

----------------------------------------------------------------------

5. Save the inspection to the Sensor before running it. See 

Section 14, Saving Inspections

 beginning on page 149.

6. Proceed to the Run screen to run the inspection.

--------------------------------------------------------------

Choosing a Tool

Before adding tools or removing any tools from the inspection, read all of 

Section 6, Tools Screen

, to become familiar with the 

tools. To choose the right tools for an inspection, consider the tool’s parameters and result options:

•

Parameters are selected inputs for each tool (example: relative threshold).

•

Results are the information returned from the tool after it has been executed.

Some tools perform evaluations, while others provide positional data for the tools that follow. Test tools evaluate, combine, or 
compare the results of other tools and determine a Pass-or-Fail judgment.

NOTE: Test tool must be chosen to evaluate the results of each tool or set of tools.
See 

Section 7, Tools

 beginning on page 57 for information about how the tools analyze images.

.----------------------------------

Содержание PresencePlus P4























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды