background image

This Product is backed by a One Year Limited Warranty.

For complete warranty information visit

www.edgetechcorp.com/register

3600 Ver3(09-04)

DiskGO!

TM

 MP3 Player

+ USB Flash Drive

Operations Manual

Thank you for purchasing the DiskGO!

TM 

 MP3 Player plus USB Flash Drive!  This device stores MP3 files for

playback or transport as well as any data files that you may need while on-the-GO!  The integrated USB

connector allows you to write/read files from most computers without installing any drivers.  We are certain you

will enjoy the convenience of using this device to listen to your favorite MP3s as well as storing all of your

important data.

System Requirements

·

USB 1.1 or 2.0 interface port running one of the following operating systems:

o

Windows 98SE/ME/CE/2000/XP, Linux 2.4 or higher, MacOS 9.0 – 10.2 (Note, this device is not

able to read/write files using MacOS 10.3.0, 10.3.1, or 10.3.2. Please update your OS to 10.3.3

or higher. Users who have updated to 10.3.5 cannot format the player with MS DOS or the play

function will be disabled. Please use an earlier version i.e. OS 9.2.2 to format the player.  Please

see notes in the Mac OS formatting section)

·

64MB of system RAM (128MB or more recommended)

Safety and Handling

·

Do not connect the device to your USB port while the power is on.  Ensure that the USB switch is set to

USB before connecting the device.

·

Do not remove the device from the USB port while it is reading or writing data.

·

Do not overcharge the rechargeable battery.  Doing so may reduce the playback time/life of the battery.

·

Do not attempt to disassemble or alter any part of the device.

·

Do not allow the product to come into contact with water or other liquids.  In the event the interior of the

device were to come into contact with water or other liquids, immediately unplug it from the computer

and/or switch the player off.

·

Do not connect or disconnect the device if your hands are wet.  There is a risk of electrical shock.

·

Do not place the product near a heat source or expose it to direct flame or heat.

·

Avoid exposing the device to extreme direct sunlight.

·

Never place the device near equipment generating strong electromagnetic fields (i.e. unshielded

speakers, high voltage power lines, etc.)  Exposure to these fields may cause malfunctions and/or data

loss and corruption.

Package Contents

·

DiskGO!

TM

 MP3 Player plus USB Flash Drive

·

Lanyard with stereo ear buds

·

USB Extension Cable

·

Operation manual and Warranty Information

Lanyard

The lanyard is intended to go around your neck for easy handling of the device during MP3 playback and

file transport.  The chrome button on the base of the lanyard is used for quick disconnect/reconnect.  To

thread the lanyard end into the lanyard handle on the device, disconnect the lanyard end at the base,

thread and reconnect.

Rechargeable Battery

When the device is connected to a computer’s USB port, the battery automatically charges.  A 2-hour

charge will provide up to 8 hours of MP3 playback.  Do not overcharge the battery.

Note – The internal flash memory does not require battery power to retain its data.  If your battery

becomes fully discharged, your MP3 and data files will remain safe.

LED Indicator

In USB Disk mode:

·

No LED – Indicates the device is turned off.

·

Solid Red/Yellow/Green – Indicates that the device is connected to the USB port and is charging.  The

Green LED will turn off once the device is fully charged.

·

Blinking Red/Yellow – Indicates that the device is currently reading or writing data.

DO NOT

 disconnect the device while the device is reading or writing files.  Data loss or damage to the

product may occur.

NEED

HELP?

TECH SUPPORT

www.edgetechcorp.com/support

Отзывы: