Edge-Core ES3510MA-DC, Руководство по управлению, Страница: 610 / 1098

C
HAPTER
24
| Authentication Commands
AAA
– 610 –
group - Specifies the server group to use.
- Specifies all hosts configure with the
tacacs-server host command.
server-group - Specifies the name of a server group configured
with the aaa group server command. (Range: 1-255 characters)
D
EFAULT
S
ETTING
Accounting is not enabled
No servers are specified
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
◆
The accounting of Exec mode commands is only supported by
servers.
◆
Note that the default and method-name fields are only used to
describe the accounting method(s) configured on the specified
server, and do not actually send any information to the
server about the methods to use.
E
XAMPLE
Console(config)#aaa accounting commands 15 default start-stop group
Console(config)#
aaa accounting
dot1x
This command enables the accounting of requested 802.1X services for
network access. Use the no form to disable the accounting service.
S
YNTAX
aaa accounting dot1x { default | method-name }
start-stop group { radius | | server-group }
no aaa accounting dot1x { default | method-name }
default - Specifies the default accounting method for service
requests.
method-name - Specifies an accounting method for service
requests. (Range: 1-255 characters)
start-stop - Records accounting from starting point and stopping
point.