Edge-Core ES3510MA-DC, Руководство по управлению, Страница: 1005 / 1098

C
HAPTER
41
| OAM Commands
– 1005 –
efm oam mode
This command sets the OAM mode on the specified port. Use the no form
to restore the default setting.
S
YNTAX
efm oam mode { active | passive }
no efm oam mode
active - All OAM functions are enabled.
passive - All OAM functions are enabled, except for OAM discovery,
and sending loopback control OAMPDUs.
D
EFAULT
S
ETTING
Active
C
OMMAND
M
ODE
Interface Configuration
C
OMMAND
U
SAGE
When set to active mode, the selected interface will initiate the OAM
discovery process. When in passive mode, it can only respond to discovery
messages.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#efm oam mode active
Console(config-if)#
clear efm oam
counters
This command clears statistical counters for various OAMPDU message
types.
S
YNTAX
clear efm oam counters [ interface-list ]
interface-list - unit / port
unit - Unit identifier. (Range: 1)
port - Port number or list of ports. To enter a list, separate
nonconsecutive port identifiers with a comma and no spaces;
use a hyphen to designate a range of ports. (Range: 1-10)
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#clear efm oam counters
Console#