background image

 

 

Quick Installation Guide 

ECWO5211-L  Enterprise  Access  Point 

ENGLISH 

Copyright ©  4IPNET, INC. All rights reserved.   

 

FCC CAUTION 

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device, 

pursuant to Part 15 of the FCC Rules.    These limits are designed to provide reasonable protection 

against  harmful  interference  in  a  residential  installation.  This  equipment  generates,  uses  and  can 

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 

cause  harmful  interference  to  radio  communications.  However,  there  is  no  guarantee  that 

interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does  cause  harmful 

interference to radio or television reception, which can be determined by turning the equipment off 

and  on,  the  user  is  encouraged  to  try  to  correct  the  interference  by  one  or  more  of  the  following 

measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to  which  the  receiver  is 

connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

 

Any changes or modifications not expressly approved by the party responsible for compliance could void the 

user's authority to operate this equipment. 

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 

This device may not cause harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation. 

 

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or 

transmitter. 

 

For  product  available  in  the  USA/Canada  market,  only  channel  1~11  can  be  operated.  Selection  of  other 

channels is not possible. 

 

This device is restricted to 

indoor

 use when operated in the 5.15 to 5.25 GHz frequency range. 

 

FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the 

potential for harmful interference to co-channel Mobile Satellite systems. 

 

IMPORTANT NOTE: 

FCC Radiation Exposure Statement: 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This 

equipment should be installed and operated with minimum distance

 20cm

 between the radiator & your body. 

Содержание ECWO5211-L











Отзывы: