background image

– 1  –

Q u i c k   S t a r t   G u i d e

1. Unpack the AP and Check Contents

ECW7212-L 
802.11a/ac/b/g/n 
Wireless Access Point

AC power adapter

Four adhesive rubber feet

Wall-mount kit—2 wall plugs and 2 screws

Documentation—

Quick Start Guide

 (this document) 

and 

Safety and Regulatory Information

Note:

 For safety and regulatory information, refer to the 

Safety and Regulatory Information

 document included with 

the AP.

2. Mount the AP

The AP can be mounted on a desktop, wall, or ceiling T-bar.

Note:

 The AP can be placed on a desktop using the 

included rubber feet. When mounting the AP on a wall or 
ceiling, do not attach the rubber feet.

a. Mounting on a Wall

Set two screws in the wall 140 mm (5.51 in.) apart.

Slide the AP’s wall mounting slots down onto the screws so 
that the unit is secure.

1

2

1

2

b. Mounting on a Ceiling T-Bar

Position the AP’s ceiling-mount clip holders on either side of 
the T-bar.

Turn the AP until the two clips lock it to the T-bar.

The AP mounting supports two different sizes of suspended 
ceiling T-bars. The position illustrated above left is for 15 mm 
bars. Use the position at a 90 degrees angle for 24.5 mm bars.

3. Connect LAN Cable

Connect Category 5e or better cable to the Eth0/PoE 
1000BASE-T RJ-45 port.

(Optional) Connect a local LAN switch or computer to the 
Eth1 1000BASE-T RJ-45 port.

Note:

 The Eth0/PoE port connection can also provide PoE 

power to the unit.

3. (Optional) Connect AC Power Adapter

Connect the power adapter to the power socket on the AP. 

Plug the power adapter into a nearby AC power source.

2

1

3

1

2

3

1

2

1

2

1

2

1

2

E012017-CS-R01

150200001485A

www.edge-core.com

802.11a/ac/b/g/n Wireless Access Point

ECW7212-L

Отзывы: