Quick Installation Guide
ECW5211-L
ENGLISH
③
No.
Item Name
Description
1
LED
Power / Status LED Indicator:
(a) Steady green light indicates a proper connection to a power
source and normal operation.
(b) The LED Indicator will start blinking when the Reset button is
pressed:
(b1) if pressed and hold for less than 5 seconds - the LED will
blink slowly, indicating that the AP is restarting.
(b2) if pressed and hold for more than 5 seconds - the LED will
blink slowly for the first 5 seconds and then blink quickly,
indicating the AP is resetting to factory default settings and
restarting.
2
2G-WiFi LED
2.4 GHz Wi-Fi LED Indicator: blinking indicates that the AP is
sending or receiving traffic on 2.4 GHz band.
3
5G-WiFi LED
5 GHz Wi-Fi LED Indicator: blinking indicates that the AP is
sending or receiving traffic on 5 GHz band.
4
Eth1/PoE LED
Eth1/PoE port status LED Indicator: turned on when traffic is
passing through Eth1/PoE port.
5
Eth2 LED
Eth2 port status LED Indicator: turned on when traffic is passing
through Eth2 port.
6
USB Port
USB interface reserved for future use.
7
Eth2 Port
RJ-45 port for Ethernet connection with downlink devices.
8
Eth1/PoE Port
RJ-45 port for uplink Ethernet connection and for PoE in. It is the
default port that can pass all VLAN traffic to an uplink device (e.g.
VLAN switch).
9
Reset Button
Press and release the button quickly (for less than 5 seconds) to
restart the AP; to reset the AP to factory default settings, press &
hold it for more than 5 seconds.
10
12V
1 A
The power socket to attach the power adapter.
