Edge-Core ECS4660-28F, Руководство по управлению, Страница: 817 / 2020

C
HAPTER
20
| Unicast Routing
Configuring the Open Shortest Path First Protocol (Version 2)
– 817 –
To show the configuration settings for OSPF interfaces:
1.
Click Routing Protocol, OSPF, Interface.
2.
Select Show from the Action list.
3.
Select the VLAN ID.
Figure 509: Showing OSPF Interfaces
To show the MD5 authentication keys configured for an interface:
1.
Click Routing Protocol, OSPF, Interface.
2.
Select Show MD5 Key from the Action list.
3.
Select the VLAN ID.
Figure 510: Showing MD5 Authentication Keys
C
ONFIGURING
V
IRTUAL
L
INKS
Use the Routing Protocol > OSPF > Virtual Link (Add) and (Configure
Detailed Settings) pages to configure a virtual link from an area that does
not have a direct physical connection to the OSPF backbone.
All OSPF areas must connect to the backbone. If an area does not have a
direct physical connection to the backbone, you can configure a virtual link
that provides a logical path to the backbone. To connect an isolated area to
the backbone, the logical path can cross a single non-backbone area (i.e.,
transit area) to reach the backbone. To define this path, you must
configure an ABR that serves as an endpoint connecting the isolated area