Edge-Core ECS4660-28F Скачать руководство пользователя страница 333

Страница: 333 / 2020

HAPTER

| Quality of Service

Creating QoS Policies

– 333 –

◆

Class Name

– Name of a class map that defines a traffic classification

upon which a policy can act.

◆

Action

–

This attribute is used to set an internal QoS value in hardware

for matching packets. The PHB label is composed of five bits, three bits

for per-hop behavior, and two bits for the color scheme used to control

queue congestion with the srTCM and trTCM metering functions.

■

Set CoS

– Configures the service provided to ingress traffic by

setting an internal CoS value for a matching packet (as specified in

rule settings for a class map). (Range: 0-7)
See

Table 18, "Default Mapping of CoS/CFI to Internal PHB/Drop

Precedence," on page 317

■

Set PHB

– Configures the service provided to ingress traffic by

setting the internal per-hop behavior for a matching packet (as

specified in rule settings for a class map). (Range: 0-7)
See

Table 18, "Default Mapping of CoS/CFI to Internal PHB/Drop

Precedence," on page 317

◆

Meter

– Check this to define the maximum throughput, burst rate, and

the action that results from a policy violation.

◆

Meter Mode

– Selects one of the following policing methods.

■

Flow

(Police Flow) – Defines the committed information rate (CIR,

or maximum throughput), committed burst size (BC, or burst rate),

and the action to take for conforming and non-conforming traffic.

Policing is based on a token bucket, where bucket depth (that is,

the maximum burst before the bucket overflows) is specified by the

“burst” field, and the average rate tokens are removed from the

bucket is by specified by the “rate” option.

■

Committed Information Rate

(CIR) – Rate in kilobits per

second. (Range: 0-10000000 kbps or maximum port speed,

whichever is lower)
The rate cannot exceed the configured interface speed.

■

Committed Burst Size

(BC) – Burst in bytes.

(Range: 0-524288 bytes)
The burst size cannot exceed 16 Mbytes.

■

Conform

– Specifies that traffic conforming to the maximum

rate (CIR) will be transmitted without any change to the DSCP

service level.

■

Transmit

– Transmits in-conformance traffic without any

change to the DSCP service level.

■

Violate

– Specifies whether the traffic that exceeds the

maximum rate (CIR) will be dropped or the DSCP service level

will be reduced.

Содержание ECS4660-28F





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS4660-28F

Отзывы:

Edge-Core ECS4660-28F, Руководство по управлению, Страница: 333 / 2020

Результаты поиска

Содержание ECS4660-28F

Отзывы: