Edge-Core ECS4660-28F Скачать руководство пользователя страница 247

Страница: 247 / 2020

HAPTER

| VLAN Configuration

IEEE 802.1Q Tunneling

– 247 –

Configure the QinQ tunnel uplink port to Uplink mode (see

"Adding an

Interface to a QinQ Tunnel" on page 250

Configure the QinQ tunnel uplink port to join the SPVLAN as a tagged
member (see

"Adding Static Members to VLANs" on page 231

NABLING

UNNELING

THE

WITCH

Use the VLAN > Tunnel (Configure Global) page to configure the switch to

operate in IEEE 802.1Q (QinQ) tunneling mode, which is used for passing

Layer 2 traffic across a service provider’s metropolitan area network. You

can also globally set the Tag Protocol Identifier (TPID) value of the tunnel

port if the attached client is using a nonstandard 2-byte ethertype to

identify 802.1Q tagged frames.

CLI R

EFERENCES

◆

"Configuring IEEE 802.1Q Tunneling" on page 1353

ARAMETERS

These parameters are displayed:

◆

Tunnel Status

– Sets the switch to QinQ mode. (Default: Disabled)

◆

Ethernet Type

– The Tag Protocol Identifier (TPID) specifies the

ethertype of incoming packets on a tunnel port. (Range: hexadecimal

8000-FFFF; Default: 8100)
Use this field to set a custom 802.1Q ethertype value for the 802.1Q

Tunnel TPID. This feature allows the switch to interoperate with third-

party switches that do not use the standard 0x8100 ethertype to

identify 802.1Q-tagged frames. For example, if 0x1234 is set as the

custom 802.1Q ethertype on a trunk port, incoming frames containing

that ethertype are assigned to the VLAN contained in the tag following

the ethertype field, as they would be with a standard 802.1Q trunk.

Frames arriving on the port containing any other ethertype are looked

upon as untagged frames, and assigned to the native VLAN of that port.
The specified ethertype only applies to ports configured in Uplink mode

(see

"Adding an Interface to a QinQ Tunnel" on page 250

). If the port is

in normal mode, the TPID is always 8100. If the port is in Access mode,

received packets are processes as untagged packets.

NTERFACE

To enable QinQ Tunneling on the switch:

Click VLAN, Tunnel.

Select Configure Global from the Step list.

Enable Tunnel Status, and specify the TPID if a client attached to a
tunnel port is using a non-standard ethertype to identify 802.1Q tagged

frames.

Click Apply.

Содержание ECS4660-28F





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS4660-28F

Отзывы:

Edge-Core ECS4660-28F, Руководство по управлению, Страница: 247 / 2020

Результаты поиска

Содержание ECS4660-28F

Отзывы: