Edge-Core ECS4660-28F Скачать руководство пользователя страница 232

Страница: 232 / 2020

HAPTER

| VLAN Configuration

IEEE 802.1Q VLANs

– 232 –

belonging to the port’s default VLAN (i.e., associated with the PVID)

are also transmitted as tagged frames.

◆

PVID

– VLAN ID assigned to untagged frames received on the interface.

(Default: 1)
If an interface is not a member of VLAN 1 and you assign its PVID to

this VLAN, the interface will automatically be added to VLAN 1 as an

untagged member. For all other VLANs, the PVID must be defined first,

then the status of the VLAN can be configured as a tagged or untagged

member.

◆

Acceptable Frame Type

– Sets the interface to accept all frame

types, including tagged or untagged frames, or only tagged frames.
When set to receive all frame types, any received frames that are

untagged are assigned to the default VLAN. (Options: All, Tagged;

Default: All)

◆

Ingress Filtering

– Determines how to process frames tagged for

VLANs for which the ingress port is not a member. (Default: Disabled)

■

Ingress filtering only affects tagged frames.

■

If ingress filtering is disabled and a port receives frames tagged for

VLANs for which it is not a member, these frames will be flooded to

all other ports (except for those VLANs explicitly forbidden on this

port).

■

If ingress filtering is enabled and a port receives frames tagged for

VLANs for which it is not a member, these frames will be discarded.

■

Ingress filtering does not affect VLAN independent BPDU frames,

such as GVRP or STP. However, they do affect VLAN dependent BPDU

frames, such as GMRP.

◆

Membership Type

– Select VLAN membership for each interface by

marking the appropriate radio button for a port or trunk:

■

Tagged

: Interface is a member of the VLAN. All packets

transmitted by the port will be tagged, that is, carry a tag and

therefore carry VLAN or CoS information.

■

Untagged

: Interface is a member of the VLAN. All packets

transmitted by the port will be untagged, that is, not carry a tag

and therefore not carry VLAN or CoS information. Note that an

interface must be assigned to at least one group as an untagged

port.

■

Forbidden

: Interface is forbidden from automatically joining the

VLAN via GVRP. For more information, see “Automatic VLAN

Registration” on page

227

■

None

: Interface is not a member of the VLAN. Packets associated

with this VLAN will not be transmitted by the interface.

Содержание ECS4660-28F





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS4660-28F

Отзывы:

Edge-Core ECS4660-28F, Руководство по управлению, Страница: 232 / 2020

Результаты поиска

Содержание ECS4660-28F

Отзывы: