Edge-Core ECS4660-28F, Руководство по управлению, Страница: 1474 / 2020

C
HAPTER
43
| Multicast Filtering Commands
MLD Filtering and Throttling
– 1474 –
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#ipv6 mld max-groups 10
Console(config-if)#
ipv6 mld
max-groups action
This command sets the MLD throttling action for an interface on the switch.
S
YNTAX
ipv6 mld max-groups action { deny | replace }
deny - The new multicast group join report is dropped.
replace - The new multicast group replaces an existing group.
D
EFAULT
S
ETTING
Deny
C
OMMAND
M
ODE
Interface Configuration (Ethernet)
C
OMMAND
U
SAGE
When the maximum number of groups is reached on a port, the switch can
take one of two actions; either “deny” or “replace.” If the action is set to
deny, any new MLD join reports will be dropped. If the action is set to
replace, the switch randomly removes an existing group and replaces it
with the new multicast group.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#ipv6 mld max-groups action replace
Console(config-if)#
ipv6 mld query-drop
This command drops any received MLD query packets. Use the no form to
restore the default setting.
S
YNTAX
[ no ] ipv6 mld query-drop
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Interface Configuration (Ethernet)