manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 892 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 892

Chapter 30

  |  IP Interface Commands

ND Snooping

–  892  –

Command Mode

Global Configuration

Command Usage

The timeout after which the switch will delete a dynamic user binding if no RA 
message is received is set to the retransmit count (see the 

ipv6 nd snooping auto-

detect retransmit count

 command) x the retransmit interval. Based on the default 

settings, this is 3 seconds.

Example

Console(config)#ipv6 nd snooping auto-detect retransmit interval 5

Console(config)#

ipv6 nd snooping

prefix timeout

This command sets the time to wait for an RA message before deleting an entry in 
the prefix table. Use the 

no

 form to restore the default setting.

Syntax 

ipv6 nd snooping prefix timeout

 

timeout

no

 

ipv6 nd snooping prefix timeout

timeout

 – The time to wait for an RA message to confirm that a prefix entry 

is still valid. (Range: 3-1800 seconds)

Default Setting 

Set to the valid lifetime field in received RA packet

Command Mode

Global Configuration

Command Usage

If ND snooping is enabled and an RA message is received on a trusted interface, the 
switch will add an entry in the prefix table based upon the Prefix Information 
contained in the message. If an RA message is not received for a table entry with 
the same prefix for the specified timeout period, the entry is deleted.

Example

Console(config)#ipv6 nd snooping prefix timeout 200

Console(config)#

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов