manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 840 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 840

Chapter 29

  |  DHCP Commands

DHCP Client

–  840  –

DHCP for IPv6

ipv6 dhcp client

rapid-commit vlan

This command specifies the Rapid Commit option for DHCPv6 message exchange 
for all DHCPv6 client requests submitted from the specified interface. Use the 

no

 

form to disable this option.

Syntax 

[

no

] 

ipv6 dhcp client rapid-commit vlan

 

vlan-list

vlan-list

 - VLAN ID, specified as a single number, a range of consecutive 

numbers separated by a hyphen, or multiple numbers separated by 
commas. (Range: 1-4094; Maximum command length: 300 characters) 

Default Setting 

Disabled

Command Mode 

Global Configuration

Command Usage 

◆

DHCPv6 clients can obtain configuration parameters from a server through a 
normal four-message exchange (solicit, advertise, request, reply), or through a 
rapid two-message exchange (solicit, reply). The rapid-commit option must be 
enabled on both client and server for the two-message exchange to be used. 

◆

This command allows two-message exchange method for prefix delegation. 
When enabled, DCHPv6 client requests submitted from the specified interface 
will include the rapid commit option in all solicit messages.

◆

If the rapid commit option has been enabled on the switch with this command, 
and on the DHCPv6 server, message exchange can be reduced from the normal 
four step process to a two-step exchange of only solicit and reply messages.

Example

Console(config)#ipv6 dhcp client rapid-commit vlan 2

Console(config)#

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов