manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 80 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 80

Chapter 2

  |  Using the Command Line Interface

Entering Commands

–  80  –

Configuration

Commands

Configuration commands are privileged level commands used to modify switch 
settings. These commands modify the running configuration only and are not 
saved when the switch is rebooted. To store the running configuration in non-
volatile storage, use the 

copy running-config startup-config

 command.

The configuration commands are organized into different modes:

◆

Global Configuration - These commands modify the system level configuration, 
and include commands such as 

hostname

 and 

snmp-server community

. 

◆

Access Control List Configuration - These commands are used for packet 
filtering.

◆

CFM Configuration - Configures connectivity monitoring using continuity 
check messages, fault verification through loopback messages, and fault 
isolation by examining end-to-end connections between Provider Edge 
devices or between Customer Edge devices.

◆

Class Map Configuration - Creates a DiffServ class map for a specified traffic 
type.

◆

ERPS Configuration – These commands configure Ethernet Ring Protection 
Switching for increased availability of Ethernet rings commonly used in service 
provider networks.

◆

IGMP Profile - Sets a profile group and enters IGMP filter profile configuration 
mode.

◆

Interface Configuration - These commands modify the port configuration such 
as 

speed-duplex

 and 

negotiation

. 

◆

Line Configuration - These commands modify the console port and Telnet 
configuration, and include command such as 

parity

 and 

databits

.

◆

Multiple Spanning Tree Configuration - These commands configure settings for 
the selected multiple spanning tree instance.

◆

Policy Map Configuration - Creates a DiffServ policy map for multiple interfaces.

◆

Time Range - Sets a time range for use by other functions, such as Access 
Control Lists.

◆

VLAN Configuration - Includes the command to create VLAN groups.

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов