manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 789 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 789

Chapter 26

  |  CFM Commands

Defining CFM Structures

–  789  –

show ethernet cfm

maintenance-points

local

This command displays the maintenance points configured on this device. 

Syntax

show ethernet cfm maintenance-points local

 

{

mep

 [

domain

 

domain-name

 | 

interface

 

interface

 | 

level

level-id

] | 

mip

 

[

domain

 

domain-name

 | 

level

level-id

]}

mep

 – 

Displays only

 

local maintenance end points. 

mip

 – 

Displays only

 

local maintenance intermediate points.

domain-name – 

Domain name. (Range: 1-43 alphanumeric characters)

interface

 – Displays CFM status for the specified interface.

ethernet

 

unit

/

port

unit

 - Unit identifier. (Range: 1-8) 

port

 - Port number. (Range: 1-28/52)

port-channel

 

channel-id

 (Range: 1-26) 

level-id 

– Maintenance level for this domain. (Range: 0-7)

Default Setting 

None

Command Mode 

Privileged Exec

Command Usage 

◆

Use the 

mep

 keyword with this command to display the MEPs configured on 

this device as DSAPs through the 

ethernet cfm mep

 command.

◆

Using the 

mip

 keyword with this command to display the MIPs generated on 

this device by the CFM protocol when the mip-creation method is set to either 
“default” or “explicit” by the 

ethernet cfm domain

 command or the 

ma index 

name

 command.

Example

This example shows all MEPs configured on this device for maintenance domain rd. 

Console#show ethernet cfm maintenance-points local mep

MPID MD Name          Level Direct VLAN Port     CC Status MAC Address

---- ---------------- ----- ------ ---- -------- --------- -----------------

   1 rd                   0 UP        1 Eth 1/ 1 Enabled   00-12-CF-3A-A8-C0

Console#

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов