Edge-Core ECS4120-28F Скачать руководство пользователя страница 785 | Manualshive

Страница: 785 / 938

Edge-Core ECS4120-28F Скачать руководство пользователя страница 785

Chapter 26

| CFM Commands

Defining CFM Structures

– 785 –

ethernet cfm

port-enable

This command enables CFM processing on an interface. Use the

no

form to disable

CFM processing on an interface.

Syntax

[

no

]

ethernet cfm port-enable

Default Setting

Enabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

◆

An interface must be enabled before a MEP can be created with the

command.

◆

If a MEP has been configured on an interface with the

ethernet cfm mep

command, it must first be deleted before CFM can be disabled on that
interface.

◆

When CFM is disabled, hardware resources previously used for CFM processing
on that interface are released, and all CFM frames entering that interface are
forwarded as normal data traffic.

Example

This example enables CFM on port 1.

Console(config)#interface ethernet 1/1

Console(config-if)#ethernet cfm port-enable

Console(config-if)#

clear ethernet cfm

ais mpid

This command clears AIS defect information for the specified MEP.

Syntax

clear ethernet cfm ais mpid

mpid

md

domain-name

ma

ma-name

mpid –

Maintenance end point identifier. (Range: 1-8191)

domain-name –

Domain name. (Range: 1-43 alphanumeric characters)

ma-name –

Maintenance association name. (Range: 1-43 alphanumeric

characters)

Default Setting

None

Command Mode

Privileged Exec

«
...
783
784
785
786
787
...
»

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов