manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 730 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 730

Chapter 24

  |  Multicast Filtering Commands

MVR for IPv6

–  730  –

mvr6 vlan

This command specifies the VLAN through which MVR6 multicast data is received. 
Use the 

no

 form of this command to restore the default MVR6 VLAN.

Syntax 

mvr6 domain

 

domain-id 

vlan

 

vlan-id

no mvr6 domain

 

domain-id 

vlan

domain-id

 - An independent multicast domain. (Range: 1-5)

vlan-id

 - Specifies the VLAN through which MVR6 multicast data is received. 

This is also the VLAN to which all source ports must be assigned. 
(Range: 1-4094) 

Default Setting 

VLAN 1

Command Mode 

Global Configuration

Command Usage 

MVR6 source ports can be configured as members of the MVR6 VLAN using the 

switchport allowed vlan

 command and 

switchport native vlan

 command, but 

MVR6 receiver ports should not be statically configured as members of this VLAN. 

Example 

The following example sets the MVR6 VLAN to VLAN 1:

Console(config)#mvr6 domain 1 vlan 1

Console(config)#

mvr6 immediate-leave

This command causes the switch to immediately remove an interface from a 
multicast stream as soon as it receives a leave message for that group. Use the 

no

 

form to restore the default settings.

Syntax 

[

no

] 

mvr6 domain

 

domain-id 

immediate-leave

domain-id

 - An independent multicast domain. (Range: 1-5)

Default Setting 

Disabled

Command Mode 

Interface Configuration (Ethernet, Port Channel)

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов