Edge-Core ECS4120-28F Скачать руководство пользователя страница 713

Страница: 713 / 938

Chapter 24

| Multicast Filtering Commands

MVR for IPv4

– 713 –

show mvr

associate

-profile

This command shows the profiles bound the specified domain.

Syntax

show mvr

[

domain

domain-id

]

associated-profile

domain-id

- An independent multicast domain. (Range: 1-5)

Default Setting

Displays profiles bound to all MVR domains.

Command Mode

Privileged Exec

Example

The following displays the profiles bound to domain 1:

Console#show mvr domain 1 associated-profile

Domain ID : 1

MVR Profile Name Start IP Addr. End IP Addr.

-------------------- --------------- ---------------

rd 228.1.23.1 228.1.23.10

testing 228.2.23.1 228.2.23.10

Console#

show mvr interface

This command shows MVR configuration settings for interfaces attached to the
MVR VLAN.

Syntax

show mvr

[

domain

domain-id

]

interface

domain-id

- An independent multicast domain. (Range: 1-5)

Default Setting

Displays configuration settings for all attached interfaces.

Command Mode

Privileged Exec

MVR Multicast VLAN

Shows the VLAN used to transport all MVR multicast traffic.

MVR Current Learned
Groups

The current number of MVR group addresses

MVR Upstream Source IP

The source IP address assigned to all upstream control packets.

Table 139: show mvr - display description

(Continued)

Field

Description

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS4120-28F

Отзывы:

Edge-Core ECS4120-28F, Справочное руководство, Страница: 713 / 938

Результаты поиска

Содержание ECS4120-28F

Отзывы: