manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 705 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 705

Chapter 24

  |  Multicast Filtering Commands

MVR for IPv4

–  705  –

mvr robustness-value

This command configures the expected packet loss, and thereby the number of 
times to generate report and group-specific queries. Use the 

no

 form to restore the 

default setting.

Syntax 

mvr robustness-value 

value

no

 

mvr robustness-value

value

 - The robustness used for all interfaces. (Range: 1-255) 

Default Setting 

2

Command Mode 

Global Configuration

Command Usage 

◆

This command is used to set the number of times report messages are sent 
upstream when changes are learned about downstream groups, and the 
number of times group-specific queries are sent to downstream receiver ports. 

◆

This command only takes effect when MVR proxy switching is enabled.   

Example 

Console(config)#mvr robustness-value 5

Console(config)#

Related Commands

mvr proxy-switching (703)

mvr source-port-

mode dynamic

This command configures the switch to only forward multicast streams which the 
source port has dynamically joined. Use the 

no

 form to restore the default setting.

Syntax 

[

no

] 

mvr source-port-mode dynamic

Default Setting 

Forwards all multicast streams which have been specified in a profile and bound to 
a domain.

Command Mode 

Global Configuration

Command Usage 

◆

By default, the switch forwards any multicast streams within the address range 
set by a profile, and bound to a domain. The multicast streams are sent to all 

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов