manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 567 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 567

Chapter 21

  |  VLAN Commands

Configuring VLAN Interfaces

–  567  –

◆

If a VLAN on the forbidden list for an interface is manually added to that 
interface, the VLAN is automatically removed from the forbidden list for that 
interface. 

Example 

The following example shows how to add VLANs 1, 2, 5 and 6 to the allowed list as 
tagged VLANs for port 1:

Console(config)#interface ethernet 1/1

Console(config-if)#switchport allowed vlan add 1,2,5,6 tagged

Console(config-if)#

switchport

ingress-filtering

This command enables ingress filtering for an interface. Use the 

no

 form to restore 

the default.

Syntax 

[

no

] 

switchport ingress-filtering

Default Setting 

Disabled

Command Mode 

Interface Configuration (Ethernet, Port Channel)

Command Usage 

◆

Ingress filtering only affects tagged frames.

◆

If ingress filtering is disabled and a port receives frames tagged for VLANs for 
which it is not a member, these frames will be flooded to all other ports (except 
for those VLANs explicitly forbidden on this port).

◆

If ingress filtering is enabled and a port receives frames tagged for VLANs for 
which it is not a member, these frames will be discarded. 

◆

Ingress filtering does not affect VLAN independent BPDU frames, such as GVRP 
or STA. However, they do affect VLAN dependent BPDU frames, such as GMRP.

Example 

The following example shows how to set the interface to port 1 and then enable 
ingress filtering:

Console(config)#interface ethernet 1/1

Console(config-if)#switchport ingress-filtering

Console(config-if)#

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов