manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 542 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 542

Chapter 20

  |  ERPS Commands

–  542  –

rpl neighbor

This command configures a ring node to be the Ring Protection Link (RPL) 
neighbor. Use the 

no

 form to restore the default setting.

Syntax 

rpl neighbor

no rpl

Default Setting 

None (that is, neither owner nor neighbor)

Command Mode 

ERPS Configuration

Command Usage 

◆

The RPL neighbor node, when configured, is a ring node adjacent to the RPL 
that is responsible for blocking its end of the RPL under normal conditions (i.e., 
the ring is established and no requests are present in the ring) in addition to the 
block at the other end by the RPL Owner Node. The RPL neighbor node may 
participate in blocking or unblocking its end of the RPL, but is not responsible 
for activating the reversion behavior.

◆

Only one RPL owner can be configured on a ring. If the switch is set as the RPL 
owner for an ERPS domain, the west ring port is set as one end of the RPL. If the 
switch is set as the RPL neighbor for an ERPS domain, the east ring port is set as 
the other end of the RPL. 

◆

The east and west connections to the ring must be specified for all ring nodes 
using the 

ring-port

 command. When this switch is configured as the RPL 

neighbor, the east ring port is set as being connected to the RPL.

◆

Note that is not mandatory to declare a RPL neighbor.

Example 

Console(config-erps)#rpl neighbor

Console(config-erps)#

rpl owner

This command configures a ring node to be the Ring Protection Link (RPL) owner. 
Use the 

no

 form to restore the default setting. 

Syntax 

rpl owner

no rpl

Default Setting 

None (that is, neither owner nor neighbor)

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов