manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 451 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 451

Chapter 14

  |  Port Mirroring Commands

RSPAN Mirroring Commands

–  451  –

has been configured, MAC address learning will still not be re-started on the 
RSPAN uplink ports. 

◆

IEEE 802.1X 

– RSPAN and 802.1X are mutually exclusive functions. When 802.1X 

is enabled globally, RSPAN uplink ports cannot be configured, even though 
RSPAN source and destination ports can still be configured. When RSPAN uplink 
ports are enabled on the switch, 802.1X cannot be enabled globally.

RSPAN uplink ports cannot be configured to use IEEE 802.1X Port 
Authentication, but RSPAN source ports and destination ports can be 
configured to use it

◆

Port Security

 – If port security is enabled on any port, that port cannot be set as 

an RSPAN uplink port, even though it can still be configured as an RSPAN source 
or destination port. Also, when a port is configured as an RSPAN uplink port, 
port security cannot be enabled on that port.

rspan source

Use this command to specify the source port and traffic type to be mirrored 
remotely. Use the 

no

 form to disable RSPAN on the specified port, or with a traffic 

type keyword to disable mirroring for the specified type.

Syntax

[

no

] 

rspan session

 

session-id

 

source

 

interface

 

interface-list

 [

rx

 | 

tx

 | 

both

]

session-id

 – A number identifying this RSPAN session. (Range: 1)

interface-list

 – One or more source ports. Use a hyphen to indicate a 

consecutive list of ports or a comma between non-consecutive ports. 

ethernet

 

unit

/

port-list 

unit

 - Unit identifier. (Range: 1)

port-list

 - One or more source ports. Use a hyphen to indicate a 

consecutive list of ports or a comma between non-consecutive 
ports. (Range: 1-28)

rx

 - Mirror received packets. 

tx

 - Mirror transmitted packets. 

both

 - Mirror both received and transmitted packets. 

Default Setting 

Both TX and RX traffic is mirrored

Command Mode 

Global Configuration

Command Usage 

◆

One or more source ports can be assigned to the same RSPAN session, either on 
the same switch or on different switches.

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов