manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 348 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 348

Chapter 9

  |  General Security Measures

ARP Inspection

–  348  –

ip arp inspection vlan

This command enables ARP Inspection for a specified VLAN or range of VLANs. Use 
the 

no

 form to disable this function.

Syntax 

[

no

] 

ip arp inspection vlan 

{

vlan-id

 | 

vlan-range

} 

vlan-id

 - VLAN ID. (Range: 1-4094)

vlan-range

 - A consecutive range of VLANs indicated by the use a hyphen, 

or a random group of VLANs with each entry separated by a comma.

Default Setting 

Disabled on all VLANs

Command Mode

Global Configuration

Command Usage

◆

When ARP Inspection is enabled globally with the 

ip arp inspection

 command, 

it becomes active only on those VLANs where it has been enabled with this 
command.

◆

When ARP Inspection is enabled globally and enabled on selected VLANs, all 
ARP request and reply packets on those VLANs are redirected to the CPU and 
their switching is handled by the ARP Inspection engine.

◆

When ARP Inspection is disabled globally, it becomes inactive for all VLANs, 
including those where ARP Inspection is enabled.

◆

When ARP Inspection is disabled, all ARP request and reply packets bypass the 
ARP Inspection engine and their manner of switching matches that of all other 
packets.

◆

Disabling and then re-enabling global ARP Inspection will not affect the ARP 
Inspection configuration for any VLANs.

◆

When ARP Inspection is disabled globally, it is still possible to configure ARP 
Inspection for individual VLANs. These configuration changes will only become 
active after ARP Inspection is globally enabled again.

Example

Console(config)#ip arp inspection vlan 1,2

Console(config)#

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов