manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 311 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 311

Chapter 9

  |  General Security Measures

DHCPv4 Snooping

–  311  –

ip dhcp snooping

information option

remote-id

This command sets the remote ID to the switch’s IP address, MAC address, or 
arbitrary string, TR-101 compliant node identifier, or removes VLAN ID from the end 
of the TR101 field. Use the 

no

 form to restore the default setting.

Syntax 

ip dhcp snooping information option

 

remote-id 

{

ip-address

 [

encode

 {

ascii

 | 

hex

}] | 

mac-address

 [

encode

 {

ascii

 | 

hex

}] | 

string

string

 

| 

tr101 

{

node-identifier 

{

ip

 | 

sysname

} | 

no-vlan-field

}

no ip dhcp snooping information option remote-id 

[

ip-address

 

encode

] | 

[

mac-address

 

encode

] | 

[

tr101 no-vlan-field

]

mac-address

 - Inserts a MAC address in the remote ID sub-option for the 

DHCP snooping agent (that is, the MAC address of the switch’s CPU).

ip-address

 - Inserts an IP address in the remote ID sub-option for the DHCP 

snooping agent (that is, the IP address of the management interface).

encode

 - Indicates encoding in ASCII or hexadecimal.

string

 - An arbitrary string inserted into the remote identifier field. 

(Range: 1-32 characters)

tr101

 

node-identifier 

- The remote ID generated by the switch is based on 

TR-101 syntax (R-124, Access_Node_ID).

ip 

- Specifies the switch’s IP address as the node identifier.

sysname 

- Specifies the system name as the node identifier.

tr101

 

no-vlan-field 

- Do not add “:VLAN” in TR101 field for untagged 

pack``ets.

Default Setting 

MAC address: hexadecimal
tr101 no-vlan-field: disabled

Command Mode

Global Configuration

Command Usage

The format for TR101 option 82 is: “<IP> eth <SID>/<PORT>[:<VLAN>]”. Note that 
the SID (Switch ID) is always 0. By default the PVID is added to the end of the TR101 
field for untagged packets. For tagged packets, the VLAN ID is always added. Use 
the 

ip dhcp snooping information option remote-id tr101 no-vlan-field

 

command to remove the VLAN ID from the end of the TR101 field for untagged 
packets. Use the 

no

 form of this command to add the PVID for untagged packets at 

the end of the TR101 field.

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов