manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 290 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 290

Chapter 9

  |  General Security Measures

Network Access (MAC Address Authentication)

–  290  –

Default Setting 

Enabled

Command Mode 

Interface Configuration 

Command Usage 

◆

When enabled, the VLAN identifiers returned by the RADIUS server through the 
802.1X authentication process will be applied to the port, providing the VLANs 
have already been created on the switch. GVRP is not used to create the VLANs.

◆

The VLAN settings specified by the first authenticated MAC address are 
implemented for a port. Other authenticated MAC addresses on the port must 
have same VLAN configuration, or they are treated as an authentication failure.

◆

If dynamic VLAN assignment is enabled on a port and the RADIUS server 
returns no VLAN configuration, the authentication is still treated as a success, 
and the host assigned to the default untagged VLAN.

◆

When the dynamic VLAN assignment status is changed on a port, all 
authenticated addresses are cleared from the secure MAC address table.

Example 

The following example enables dynamic VLAN assignment on port 1.

Console(config)#interface ethernet 1/1

Console(config-if)#network-access dynamic-vlan

Console(config-if)#

network-access

guest-vlan

Use this command to assign all traffic on a port to a guest VLAN when 802.1x 
authentication or MAC authentication is rejected. Use the 

no

 form of this command 

to disable guest VLAN assignment.

Syntax

network-access guest-vlan

 

vlan-id

no network-access guest-vlan

vlan-id

 - VLAN ID (Range: 1-4094) 

Default Setting

Disabled

Command Mode

Interface Configuration

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов