manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 127 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 127

Chapter 4

  |  System Management Commands

File Management

–  127  –

Example 

The following example shows how to display all file information:

Console#dir

File Name                      Type    Startup Modified Time       Size (bytes)

------------------------------ ------- ------- ------------------- ------------

 Unit 1:

ecs4120-run-v1.0.2.21.bix      OpCode  Y       2016-12-15 07:16:54     19216980

Factory_Default_Config.cfg     Config  N       2015-08-07 03:59:20          455

startup1.cfg                   Config  Y       2016-08-05 02:33:57         1496

-------------------------------------------------------------------------------

                        Free space for compressed user config files:   30281728

                                                        Total space:     256 MB

Console#

umount usbdisk

This command prepares the USB memory device to be safely removed from the 
switch.

Syntax 

umount usbdisk

Default Setting 

None

Command Mode 

Privileged Exec

Command Usage 

Before disconnecting a USB memory device, you must unmount it first. This is 
similar to “Safely Remove Hardware” in Windows where the device will not 
unmount until all data transfers have been finished. 

Example

Console#umount usbdisk

You can safely remove your usbdisk.

Console#

Startup

Shows if this file is used when the system is started.

Modified Time

The date and time the file was last modified.

Size

The length of the file in bytes.

Table 18: File Directory Information 

(Continued)

 

Column Heading

Description

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов