Edge-Core ECS4110-28T Скачать руководство пользователя страница 95

Страница: 95 / 1514

HAPTER

| Initial Switch Configuration

Basic Configuration

– 95 –

OWNLOADING

ONFIGURATION

ILE

EFERENCED

DHCP S

ERVER

Information passed on to the switch from a DHCP server may also include a

configuration file to be downloaded and the TFTP servers where that file

can be accessed. If the Factory Default Configuration file is used to

provision the switch at startup, in addition to requesting IP configuration

settings from the DHCP server, it will also ask for the name of a bootup

configuration file and TFTP servers where that file is stored.

If the switch receives information that allows it to download the remote

bootup file, it will save this file to a local buffer, and then restart the

provision process.

Note the following DHCP client behavior:

◆

The bootup configuration file received from a TFTP server is stored on

the switch with the original file name. If this file name already exists in

the switch, the file is overwritten.

◆

If the name of the bootup configuration file is the same as the Factory

Default Configuration file, the download procedure will be terminated,

and the switch will not send any further DHCP client requests.

◆

If the switch fails to download the bootup configuration file based on

information passed by the DHCP server, it will not send any further

DHCP client requests.

◆

If the switch does not receive a DHCP response prior to completing the

bootup process, it will continue to send a DHCP client request once a

minute. These requests will only be terminated if the switch’s address is

manually configured, but will resume if the address mode is set back to

DHCP.

To successfully transmit a bootup configuration file to the switch the DHCP

daemon (using a Linux based system for this example) must be configured

with the following information:

◆

Options 60, 66 and 67 statements can be added to the daemon’s

configuration file.

◆

By default, DHCP option 66/67 parameters are not carried in a DHCP

server reply. To ask for a DHCP reply with option 66/67 information, the

DHCP client request sent by this switch includes a “parameter request

list” asking for this information. Besides, the client request also

includes a “vendor class identifier” that allows the DHCP server to

identify the device, and select the appropriate configuration file for

download. This information is included in Option 55 and 124.

Table 3: Options 60, 66 and 67 Statements

Option

Statement

Keyword

Parameter

vendor-class-identifier

a string indicating the vendor class identifier

tftp-server-name

a string indicating the tftp server name

bootfile-name

a string indicating the bootfile name

Содержание ECS4110-28T











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS4110-28T

Отзывы:

Edge-Core ECS4110-28T, Руководство по управлению, Страница: 95 / 1514

Результаты поиска

Содержание ECS4110-28T

Отзывы: