manualshive.com logo in svg

Edge-Core ECS4110-28T, Руководство по управлению, Страница: 1231 / 1514

Поделиться
Скачать
Edge-Core ECS4110-28T Скачать руководство пользователя страница 1231

C

HAPTER

 40

  |  Multicast Filtering Commands

IGMP Snooping

–  1231  –

ip igmp snooping

tcn-flood

This command enables flooding of multicast traffic if a spanning tree 

topology change notification (TCN) occurs. Use the 

no

 form to disable 

flooding.

S

YNTAX

 

[

no

] 

ip igmp snooping tcn-flood

D

EFAULT

 S

ETTING

 

Disabled

C

OMMAND

 M

ODE

 

Global Configuration

C

OMMAND

 U

SAGE

 

◆

When a spanning tree topology change occurs, the multicast 

membership information learned by the switch may be out of date. For 

example, a host linked to one port before the topology change (TC) 

may be moved to another port after the change. To ensure that 

multicast data is delivered to all receivers, by default, a switch in a 

VLAN (with IGMP snooping enabled) that receives a Bridge Protocol 

Data Unit (BPDU) with the TC bit set (by the root bridge) will enter into 

“multicast flooding mode” for a period of time until the topology has 

stabilized and the new locations of all multicast receivers are learned. 

◆

If a topology change notification (TCN) is received, and all the uplink 

ports are subsequently deleted, a time out mechanism is used to delete 

all of the currently learned multicast channels. 

◆

When a new uplink port starts up, the switch sends unsolicited reports 

for all current learned channels out through the new uplink port.

◆

By default, the switch immediately enters into “multicast flooding 

mode” when a spanning tree topology change occurs. In this mode, 

multicast traffic will be flooded to all VLAN ports. If many ports have 

subscribed to different multicast groups, flooding may cause excessive 

loading on the link between the switch and the end host. Flooding may 

be disabled to avoid this, causing multicast traffic to be delivered only 

to those ports on which multicast group members have been learned.

◆

When the spanning tree topology changes, the root bridge sends a 

proxy query to quickly re-learn the host membership/port relations for 

multicast channels. The root bridge also sends an unsolicited Multicast 

Router Discover (MRD) request to quickly locate the multicast routers in 

this VLAN.

The proxy query and unsolicited MRD request are flooded to all VLAN 

ports except for the receiving port when the switch receives such 

packets.

Содержание ECS4110-28T











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов